RX Easihold Spray 5Ltr

User Guide Link: https://linktr.ee/easiholdeu

How to use Spray Method Day 1:

• STEP 1: SHAKE & PREPARE
  Shake bottle well and pour EASIHOLD into your sprayer. We recommend using an Airless Sprayer.
  Shake bottle well and ensure nozzle is set to the correct setting.
• STEP 2: SPRAY COAT 1
  Apply the first coat to your clean and dry surface, spraying slowly and controlled, ensuring an even coverage – Remember, LESS IS MORE with EASIHOLD. Do not to oversaturate!
• STEP 3: RAKE & TURN 
  After applying the first coat, rake/turn the rocks or mulch to expose the uncoated material. This is to ensure your surface is fully coated with EASIHOLD throughout.
• STEP 4: COAT 2 & COMPACT 
  Follow the same method as Step 2 for second coat. Once an even coverage has been achieved, compact your surface using a trowel or a large, flat piece of wood for best binding results.

How to use Spray Method Day 2:

• STEP 5: APPLY TOP COAT
  Once the first two coats are dry, apply the third and final topcoat to your surface. NO NEED TO TURN AGAIN. Allow to dry and repeat topcoat for extra hold, if necessary.
  LEAVE TO DRY FOR 12-36 HOURS

Tips: 

• Compaction is key to acheiving the best hold possible for your surface, increasing strength by 70%!
• Flushing your sprayer with warm water after each coat will reduce the risk of blockages.
• In the event of spillage use hot, soapy water and scrub to remove EASIHOLD.
• NEW ROCKS OR MULCH?
  We recommend the Mix Method. Detailed instructions on the next page.

How to use Mix Method Day 1:

• STEP 1: MIX
  Pour EASIHOLD in a mixing bucket with your rocks/mulch at a ratio of 1:25 by volume. Mix until all material is coated evenly. DO NOT OVERSATURATE.
• STEP 2: POUR & SPREAD
  Pour your mixed material to the desired area and spread at a depth of approx 20mm/¾” ensuring the area is permeable to all for full drainage.
• STEP 3: COMPACT
  Compact the stones or mulch using a trowel or large, flat piece of wood. A flattened compacted surface will produce the best binding results.
  LEAVE TO DRY FOR 12- 36 HOURS

REMEMBER:
Ensure that your stones/ mulch are CLEAN & DRY before applying EASIHOLD.